Searching For A Tape Position With Picture(Scanning); Still Picture; Searching For Tape Position Without Picture(Forward Wind And Rewind); Index Search - Philips TV-Video Combi 14PV374/07 Operating Instructions Manual

How can I set the counter to '0:00:00'?
You can set the counter to '0:00:00' with
When you put a cassette in the TV-Video Combi, the
counter will automatically reset to '0:00:00'.
The counter does not move
This occurs when there are no recordings on a por-
tion of a tape. This is not a fault in your TV-Video
Combi.
The screen shows '-0:01:20'
If you rewind a cassette from the tape position
'0:00:00', the counter will show for instance,
'-0:01:20' (the cassette was rewound to 1 minute and
20 seconds before '0:00:00').
'-:--' is displayed in the 'REM' counter
This counter will automatically recognise the length
of the tape. In addition, when you put in a cassette
the TV-Video Combi must first calculate the time
played. Therefore, '-:--' appears first and only after
the tape has been running for a few seconds, the
correct playing time will be shown.
Searching for a tape position with
picture (scanning)
1.
1.
While a cassette is playing, press
(reverse) or
FWD 1- B
times.
2.
2.
Press to resume playback.
PLAY B-K

6. Manual recording

General information

Use 'Manual Recording' to make a spontaneous
recording (for example, a programme currently being
shown).
If you want to start and stop a recording manually, read
the section 'Recording without automatic switch-off'.
If you want to start a recording manually but have it
stopped automatically, read the section
'Recording with automatic switch-off'. (e.g. not to
record to the end of the tape)
Read the section 'Automatic recording from a satel-
lite receiver', if you want a recording to be controlled
automatically by a satellite receiver.
.
CLEAR
REW0- s
(forward) one or more

Still picture

1.
1.
During playback, press
tape and display a still picture.
2.
2. To continue playback, press
Scanning and still motion interferes with the pic-
ture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.
Searching for tape position without
picture (forward wind and rewind)
1.
1. Stop the tape with
2.
2.
Press
REW0- s
(forward).
3.
3. To stop the tape, press

Index search

Every time a tape is recorded, an index mark is
written on the tape.
These marked positions can be found again
quickly and easily later.
1.
1. To search for the previous marking, press
and then
REW0- s
2.
2. For the next marking, press
.
FWD 1- B
3.
3. As soon as the TV-Video Combi finds this marking,
it automatically switches to playback.

Manual Tracking

To adjust the tracking manually, press
the TV-Video Combi during playback .
Tracking returns to Automatic Tracking Adjustment
when you press
STOP C-L
Recording without automatic
switch-off
1.
1. Insert a cassette.
2.
2.
Use
PROG P+
programme number you want to record, for
example, 'P01'.
3.
3.
To start recording, press
4.
4.
To stop recording, press
11
to stop the
STILL 2
PLAY B-K
.
STOP C-L
(reverse) or
FWD 1- B
.
STOP C-L
.
and then
INDEX
or
P+
or insert a tape.
or to select the
0..9
PROG P–
.
REC I
.
STOP C-L
.
INDEX
on
P-
EN