Manual Tv Channel Settings - Philips 21PV620/07 Operating Instructions Manual

B IMPORTANT: ALWAYS switch the set off with the
STANDBY m button, when using the '
' function.
trol
D When the child lock is active, you can only operate the
TV-VIDEO Combi with the remote control.
D If a button is pressed with the child lock 'on', '
tal Control active
D Programmed recordings are made despite the child lock
and cannot be interrupted.

Manual TV Channel Settings

In certain cases the Automatic TV Channel Search may not be
able to find all of the TV channels (e.g. coded TV channels).
You can then use this manual method to set the channels.
a
Select the line '
Installation
buttons or and confirm with the menu button
A B
C .
b
Select the line '
Manual store
buttons A or B and confirm with the menu button
C .
MANUAL STORE
Channel/Frequency
TV system
Search
Fine tuning
Name edit
Programme number
Decoder
NICAM
Exit:
press MENU
c
Select in line '
Channel/Frequency
' ': frequency
FREQU
' ': channel
C CH
' ': special channel
S CH
d
In the line '
TV system
system.
e
When you know the channel number or frequency for the
required TV channel, you can enter the data in line
' ' with the digit buttons
Search
16
Parental con-
Paren-
' appears in the display.
' with the menu
' with the menu
FREQU
PAL
123
(,,,,,,n=,,,,,,$
xxx
P01
OFF
OFF
':
', select the required receiving
.
0-9
E If you don't know the channel number or frequency for
the required TV channel, press the
searching.
f
If you want to change the automatic TV channel setting,
select the line '
Fine tuning
Press the menu buttons
the automatic TV channel setting.
Important: This re-tuning is only necessary and useful in
special cases, e.g. when there are stripes on the picture
with cable-TV systems.
g
If you want to change the TV channel name, press the
button in line '
C
Name edit
E Select the character you want to change with the menu
buttons or .
D C
E Change the character with the menu buttons
B .
E To end, press the
button
OK
E To store the TV channel name, press the
h
In the line '
Programme number
quired programme number, e.g.: '
buttons C or D .
i
If you want to allocate a decoder, switch the decoder
function 'on' in the line '
buttons or .
D C
j
If you want to use NICAM, switch the function 'on' in the
line ' ', using the menu buttons
NICAM
k
To store the TV channel, press the
l
If you want to search for further TV channels, start again
c
at step .
To finish, press the
MENU
D If you have programmed a TIMER, you cannot activate
the '
Manual store
D If the '
Wake-up timer
you can not activate the '
C button to start
'.
D or C repeatedly to vary
'.
A or
button.
OK
', select the re-
' with the menu
P01
', using the menu
Decoder
D or C .
button.
OK
button.
' function.
' function has been actived,
' function.
Manual store