Table of Contents
Advertisement
3.
PLAYBACK
Playback a cassette
a
Insert a cassette into the cassette slot.
b
Press the
PLAY G
playback button.
c
To interrupt, press the
d
To eject, press the
J
D Remove the cassette before transporting the TV-VIDEO
Combi.
D Some hired cassettes may have a poor picture/sound
quality. This is not a fault in your set.
D Some functions switch off automatically after a while
(e.g.: Pause, Still Picture, Scanning). This helps to protect
the cassette and prevent unnecessary power consump-
tion.
D With this set you can playback cassettes that have been
recorded on another video recorder in the NTSC stan-
dard.
D If you load a cassette with erase protection, the
TV-VIDEO Combi starts playback automatically.
Tape position indication
D Press the
button to display the current tape position.
OK
D To change the type of tape position display, proceed as
follows:
a
During playback, press the
b
Select the line '
' with the menu buttons
Tape
B
and confirm with the
c
Select the line '
Tape counter
buttons
A
or
B
.
d
With the menu buttons
check the time used, or '
the tape.
e
Confirm with the
button.
OK
button.
STOP h
button on the set.
button.
MENU
or
A
button.
OK
' with the menu
or
select '
' to
D
C
USED
' to check the time left on
LEFT
Searching for tape position with picture
a
During playback, press the
ward) button once or several times.
b
To interrupt at the required position, press the
button.
D The sound is turned off during picture search.
Searching for tape position without picture
a
Stop the tape with the
b
Press the
H
(reverse) or
c
To interrupt at the required position, press the
button.
Picture scanning during wind/rewind
(Instant View)
During wind/rewind, you can have a quick access to picture
scanning.
a
If you hold the
(rewind) or
H
ing wind or rewind, you will switch to picture scanning.
b
If you release the button, the video recorder will
automatically switch back to rewind or wind again.
Automatic search for tape position (index
search)
At the beginning of each recording, the TV-VIDEO Combi
marks the tape with a code mark.
a
Press the
INDEX E
button. Press the
lect the next code mark or the
vious code mark.
D Press the
I
or the
code marks.
b
When the TV-VIDEO Combi finds the code mark or a blank
space during index search, it will automatically switch to
playback.
D When you press a tape control button (e.g.
STOP h
), the index search will be interrupted.
D You cannot use the function 'index search' with record-
ings made on a video recorder that does not have this
code mark function.
(reverse) or
(for-
H
I
PLAY G
button.
STOP h
I
(forward) button.
STOP h
(wind) button dur-
I
I
button to se-
H
button for the pre-
H
again to search for further
PLAY G
or
9
Advertisement
Table of Contents
