Table of Contents
Advertisement
5.
AUTOMATIC (PROGRAMMED) RECORDING
The TV-VIDEO Combi needs the following information for every
programmed recording:
* the date on which the recording is to be made
* the programme number for the TV channel
* the start and stop time of the recording
* VPS/PDC on or off
The TV-VIDEO Combi stores all the information mentioned
above in what is known as a TIMER block. You can programme
up to 6 TIMER blocks, one month in advance.
'VPS' (Video Programming System) / 'PDC'
(Programme Delivery Control)
With VPS/PDC, the TV station controls the beginning and the
length of the programmed recording. This means that the
TV-VIDEO Combi switches itself on and off at the right time
even if a TV programme you have programmed begins earlier
or finishes later than expected.
Usually the start time is the same as the VPS/PDC time. If,
however, in the TV guide, in addition to a TV programme's start
time, a different VPS/PDC time is given, e.g.: '20.15 (VPS 20.14)',
you have to enter '20.14' as the start time exactly to the
minute.
If you want to enter a time that differs from the VPS/PDC time,
you must switch off 'VPS/PDC'.
12
Programming with 'VIDEOPlus+'
All the information required for a programming is contained
encoded in the VIDEOPlus+ code.
a
Press the
button on the remote control.
SV/V+
b
Please enter the VIDEOPlus+ code (up to 9 digits) printed
in your TV guide next to the start time of a TV programme.
If you make a mistake, clear with the
VIDEOPLUS
CODE
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1 2 3 4 5 6
( ( (
0-9
c
Programming at daily or weekly intervals:
1. Press the
button.
C
2. Select the interval with the menu buttons
D '
': Recording at daily intervals from Mondays to
Mo-Fr
Fridays inclusive.
'
': Recording at daily intervals from Mondays to
Mo-Su
Sundays inclusive.
'
': Recording at weekly intervals on the same
WEEKLY
day of the week.
'
': Single recording.
ONCE
d
Confirm with the
button.
OK
D The data has been stored in a TIMER block.
e
Confirm with the
TIMER k
D Make sure that a cassette without erase protection has
been loaded.
D If VIDEOPlus+ does not recognize the TV channel, you
must select the required programme number with the
P p
button. These settings will be stored automati-
cally.
button.
CLEAR
ONCE
Store:
press OK
or
A
B
button.
.
Advertisement
Table of Contents
