Debug Ipv6 Dhcp - Dell S6100 Configuration Manual

Version
8.2.1.0

debug ipv6 dhcp

To enable debug logs for DHCPv6 relay agent transactions.
Syntax debug ipv6 dhcp
To disable the debug logs for dhcpv6 relay agent transactions, use the debug ipv6 dhcp command.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
default-router
Assign a default gateway to clients based on the address pool.
Syntax default-router address [address2...address8]
Parameters
address
Defaults None
Command Modes DHCP <POOL>
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
544 Dynamic Host Configuration Protocol (DHCP)
Description
Introduced on the C-Series and S-Series.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S4810, S4820T, S6000 and Z-Series.
Enter a list of routers that may be the default gateway for clients on the subnet. You may
specify up to eight routers. List them in order of preference.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.