JVC DX-J35EE Service Manual page 18

3.1.9 Removing the MICON BOARD assembly (See Fig.17)
(1) Disconnect the power cord from connector
MICON BOARD assembly.
(2) Disconnect the card wire from FL BOARD assembly con-
nected to connector CN500
bly.
(3) Disconnect the card wire from CASSETTE MECHANISM
BOARD assembly connected to connector
MICON BOARD assembly.
(4) Disconnect the card wire from PLAY BOARD assembly
connected to connector
sembly.
(5) Remove the POWER TRANSFORMER.
3.1.10 Removing the FRONT PANEL assembly (See Fig.18, 19)
(1) Remove the one screw N attaching the EARTH WIRE from
USB BOARD assembly. (See Fig.18)
(2) Remove the one screw P attaching the EARTH WIRE from
MIC BOARD assembly. (See Fig.19)
(3) Disengage two hooks b engaged both side of FRONT
PANEL assembly. (See Fig.19)
1-18 (No.MB620)
CN410
of the MICON BOARD assem-
CN501
CN430 of the MICON BOARD as-
of the
CN500
of the
CN430
P
CN501
Fig.17
N
Fig.18
b
hook
Fig.19
CN410