Table of Contents
Advertisement
3.1.2 Removing the DVD MECHANISM assembly (See Fig.3 to 5)
(1) Disconnect the card wires from MICON BOARD assembly
connected to connector
BOARD assembly. (See Fig.3)
(2) Disconnect the card wire from AMP BOARD assembly con-
nected to connector
CN702
(See Fig.3)
(3) Disconnect the card wire from SURROUND BOARD as-
sembly connected to connector
assembly. (See Fig.3)
(4) Remove the two screws D attaching the DVD MECHA-
NISM assembly. (See Fig.4)
(5) Disconnect the connector wire from USB BOARD assem-
bly connected to connector
sembly. (See Fig.5)
CN701 CN703
CN701
and
CN801
of the DVD
of the DVD BOARD assembly.
CN703
of the DVD BOARD
CN811
of the DVD BOARD as-
CN702 CN801
Fig.3
D
Fig.4
CN811
Fig.5
(No.MB620)1-11
Hide quick links:
Advertisement
Table of Contents
