Makita DGA405 Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Stator complete
ASSEMBLING
Assemble Stator complete as drawn in Fig. 13.
Fig. 13
1. Fit four projections on Housing set into four
mating cavities in Stator complete.
Mating cavity on
the left side and
the right side
(tow each)
Projections in
Housing set
on the left side
and the right side
(two each)
2. Be sure to align the center line of Bearing room
with the terminal of Stator complete.
Bearing room
(to fit Ball bearing
607LLB of Rotor
ass'y) on Housing
set
(Center line)
Terminal of
Stator complete
P 7/ 11