Bottom - Buffalo WZR-600DHP2 User Manual

Notes:
• WZR-900DHP has an USB 3.0 port and WZR-600DHP2 has an USB 2.0 port.
• USB 3.0 hubs are not supported. Use USB 2.0 hubs only.
6
LAN LED (Green)
On:
An Ethernet device is connected.
Blinking:
An Ethernet device is communicating.
7
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub supports 10 Mbps, 100
Mbps, and 1000 Mbps connections.
8
Internet LED (Green)
On:
The Internet port is connected.
Blinking:
The Internet port is transmitting data.
9
Internet Port
10 Mbps, 100 Mbps, and 1000 Mbps connections are supported.
Note:
In bridge/AP mode (router off ), the Internet port becomes a regular LAN port, for a total of 5 usable LAN ports.
10
Power button
This button turns the power on and off.
11
DC connector
Connect the included AC adapter here.

Bottom

1
Reset button
To reset all settings, hold down this button until the Buffalo LED turns red (about 3 seconds). The power must be
on for this to work.
5