Vlan - Panasonic KX-HDV130 Manual

4.3.2 Ethernet Port Settings
Value Range
Default Value
Configuration File Reference
Packet Interval
Description
Value Range
Default Value
Configuration File Reference

4.3.2.4 VLAN

Enable VLAN
Description
Value Range
Default Value
Configuration File Reference
IP Phone VLAN ID
Description
Value Range
Default Value
Configuration File Reference
IP Phone Priority
Description
Value Range
Default Value
Configuration File Reference
74 Administrator Guide
•
Yes
•
No
No
CDP_ENABLE
Specifies the interval, in seconds, between sending CDP frames.
1-3600
30
CDP_INTERVAL
Selects whether to use the VLAN feature to perform VoIP
communication securely.
Note
•
You should specify "Yes" for only one of "Enable LLDP", or
"Enable VLAN".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "Enable VLAN" >
"Enable LLDP". Therefore, if "Yes" is specified for both
"Enable VLAN" and "Enable LLDP", the VLAN-related
settings are used.
•
Yes
•
No
No
VLAN_ENABLE
Specifies the VLAN ID for the IP Phone.
0–4094
2
VLAN_ID_IP_PHONE
Selects the priority for the IP Phone.
0–7
7
VLAN_PRI_IP_PHONE
Document Version: 2017-07