Lldp Settings; Vlan Settings - Panasonic KX-UTG300 Operating Instructions Manual

Customizing the Telephone
Setting

LLDP Settings

Setting
Enable LLDP
LLDP-MED Interval timer
LLDP: Link Layer Discovery Protocol, MED: Media Endpoint Discovery
*1
CDP Settings
Setting
Enable CDP
CDP Interval timer

VLAN Settings

Setting
Enable IP Phone VLAN
IP Phone VLAN ID
Enable PC VLAN
PC VLAN ID
48 Operating Instructions
Sub-Setting
IPv6 Default If DHCP is not enabled, you
Gateway must specify the default
gateway.
IPv6 Auto DNS Enable or disable Auto DNS
for IPv6.
IPv6 DNS1 If IPv6 Auto DNS is not
enabled, you can specify the
primary DNS server IP
address.
IPv6 DNS2 If IPv6 Auto DNS is not
enabled, you can specify the
secondary DNS server IP
address. Leave blank if a
secondary DNS server is not
used.
Description
Enable or disable LLDP
Specify the LLDP-MED
timer.
Description
Enable or disable CDP.
Specify the CDP interval timer.
Description
Enable or disable VLAN (Virtual
LAN) settings.
Specify the VLAN ID.
Enable or disable PC over a VLAN
(Virtual LAN).
Specify the PC VLAN ID.
Description
.
*1
interval 5-3600 seconds
*1
5-3600 seconds
Value Range
1-46 characters
Yes, No
1-46 characters
1-46 characters
Value Range
Yes, No
Value Range
Yes, No
Value Range
Yes, No
NULL, 0-4094
Yes, No
NULL, 0-4094
Document Version 2014-04
Default
—
Yes
—
—
Default
No
30
Default
No
30
Default
No
2
No
1