About the ASA 5500-X
4
Hard-disk release button
5
Hard-disk slot
6
Alarm
7
VPN
8
HD1
9
HD0
1
PS1
0
1
PS0
1
1
Active
2
1
Boot
3
Rear Panel LEDs
Figure 3
shows the rear panel LEDs for the ASA 5500-X.
Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Hardware Installation Guide
Releases hard-disk 0 from the device.
Indicates the slot for hard-disk 0.
System operating status:
Off—Normal operating system function.
Solid amber—Critical Alarm indicating one or more of the following:
—
a major failure of a hardware or software component.
—
an over-temperature condition.
—
power voltage is outside of the tolerance range.
Note:
May appear red on some devices.
VPN tunnel status:
Solid green—VPN tunnel is established.
Off—No VPN tunnel established.
Hard Disk Drive 1 status:
Flashing green—Proportioned to read/write activity.
Solid amber—Hard-disk drive failure.
Off—No hard-disk drive present.
Hard Disk Drive 0 status:
Flashing green—Proportioned to read/write activity.
Solid amber—Hard-disk drive failure.
Off—No hard-disk drive present.
Status of the optional redundant power supply.
Status of the primary power supply that ships with the product.
Status of the failover pair:
Solid green—Failover pair is operating normally.
Off—Failover pair is not operational.
Power-up diagnostics:
Flashing green—Power-up diagnostics are running, or system is booting.
Solid green—System has passed power-up diagnostics.
Off—Power-up diagnostics are not operational.
ASA Chassis Panels
15