Where To Go Next - Cisco ASA 5512-X Quick Start Manual

Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Quick Start Guide
8. (Optional) Check Monitor-only to send a read-only copy of traffic to the module, i.e. passive mode.
9. Click Finish and then Apply.
Repeat this procedure to configure additional traffic flows as desired.

8. Where to Go Next


For more information about the ASA FirePOWER module and ASA operation, see the "ASA FirePOWER Module" chapter in
the ASA/ASDM firewall configuration guide, or the ASDM online help. You can find links to all ASA/ASDM documentation
at Navigating the Cisco ASA Series

For more information about ASA FirePOWER configuration, see the online help or the
configuration guide
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of
Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The
use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2016 Cisco Systems, Inc. All rights reserved.
Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Quick Start Guide
Documentation.
or the Firepower Management Center configuration guide
8. Where to Go Next
ASA FirePOWER module
for your version.
13