Run Other Asdm Wizards And Advanced Configuration; Configure The Asa Firepower Module - Cisco ASA 5512-X Quick Start Manual

Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Quick Start Guide
Set the following values to work with the default configuration:
— IP Address—192.168.1.2
— Subnet Mask—255.255.255.0
— Gateway—192.168.1.1
9. Click I accept the agreement, and click Next or Finish to complete the wizard.
10. Quit ASDM, and then relaunch. You should see ASA FirePOWER tabs on the Home page.

6. Run Other ASDM Wizards and Advanced Configuration

ASDM includes many wizards to configure your security policy. See the Wizards menu for all available wizards.
To continue configuring your ASA, see the documents available for your software version at
Documentation.

7.Configure the ASA FirePOWER Module

Use ASDM to install licenses, configure the module security policy, and send traffic to the module.
Note: You can alternatively use the Firepower Management Center to manage the ASA FirePOWER module. See the
FirePOWER Module Quick Start Guide
Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Quick Start Guide
for more information.
6. Run Other ASDM Wizards and Advanced Configuration
Navigating the Cisco ASA Series
ASA
11