Receiving Unit - Toshiba e-STUDIO5506AC Hardware Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
18 Close the Hole Punch Unit cover when it is installed.
19 Close the front cover of the finisher, and connect the finisher to the equipment.
Move the finisher slowly placing your hands on the positions shown in the figure.
Be careful not to let your fingers be caught between the finisher and the equipment.
This could injure you.
 Receiving unit
 Receiving tray
Remove the paper from the receiving tray.
1
Clear the paper misfeed in the bridge unit.
2
 P.44 "Bridge unit"
Clearing a Paper Misfeed 41