Drawer Feeding Portion - Toshiba e-STUDIO5506AC Hardware Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
4 Pull out the drawer of the External Large Capacity Feeder and remove the misfed paper.
2 2
1 1
5 Check that there is no folded/curled paper or overloading, and then close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated on the rear side guide.
Connect the External Large Capacity Feeder to the equipment.
6
Slowly move the External Large Capacity Feeder placing your hands on the positions shown in the figure.
 Drawer feeding portion
Be careful not to let your fingers be caught between the equipment and the External Large Capacity Feeder.
This could injure you.
1 Pushing the lock lever, separate the External Large Capacity Feeder (if attached, optional) from
the equipment.
Clearing a Paper Misfeed 25