Table of Contents
Advertisement
Preparing the Handle Unit and LCD Monitor
Preparing the Handle Unit and LCD Monitor
By attaching the LA-V1 LCD Attachment Unit
the HDU-2 Handle Unit
28
Using the LCD Monitor
1
Supplied accessory for the C200; optional accessory for the C200B.
Attaching the HDU-2 Handle Unit
1 Attach the handle unit to the camera.
2 Turn the lock screw.
3 Use the hex wrench
handle unit firmly.
2
Supplied with the HDU-2.
NOTES
• The handle unit has 0.64 cm (1/4") sockets, giving you the option to
attach a variety of commercially available accessories.
• The handle unit has two through-holes (∅ 8.8 mm (0.35 in.)) that are
35.5 mm (1.4 in.) apart center-to-center.
Attaching and Removing the LM-V1 LCD Monitor
Once you attach the LCD monitor to the LCD attachment unit, you can attach it to the camera body or handle
unit. Further ahead you will find details about using the LCD panel and adjusting the LCD screen (A 40).
Attaching the LCD Monitor
To attach the LCD monitor to the handle unit
1 Set the Q switch to OFF.
2 Rotate the LCD monitor mount 180° toward the LCD
attachment unit lock screw and attach the LCD monitor.
• Align the Í marks on the LCD monitor and LCD
monitor mount.
• Use the hex wrench
secure it firmly with the LCD monitor fixation bolt on the LCD monitor mount.
1
Supplied with the HDU-2.
• Based on your needs, you can mount the LCD monitor so that it faces toward or away from you.
3 Align the LCD attachment unit mount to the handle unit's front accessory mount and then tighten the LCD
attachment unit lock screw.
1
to the LM-V1 LCD Monitor
1
or directly to the camera body itself. For details on adjusting the LCD monitor, refer to
Adjusting the LCD Screen or Viewfinder
(A 40) and
2
and hex socket head bolt
1
(for 0.64 cm, 1/4" screws) to
1
2
to secure the
, you can attach the LCD monitor to
(A 41).
Advertisement
Table of Contents
