Preparing The Handle Unit And Lcd Monitor; Attaching The Hdu-2 Handle Unit; Attaching And Removing The Lm-V1 Lcd Monitor - Canon C200B Instruction Manual

Preparing the Handle Unit and LCD Monitor

Preparing the Handle Unit and LCD Monitor

Attaching the HDU-2 Handle Unit

1 Attach the handle unit to the camera.
28
2 Use the hex wrench
screw and hex socket head bolt
1
Supplied with the HDU-2.
NOTES
• The handle unit has 0.64 cm (1/4") sockets, giving you the option to
attach a variety of commercially available accessories.
• The handle unit has two through-holes (∅ 8.8 mm (0.35 in.)) that are
35.5 mm (1.4 in.) apart center-to-center.

Attaching and Removing the LM-V1 LCD Monitor

By attaching the LA-V1 LCD Attachment Unit
the HDU-2 Handle Unit
Using the LCD Monitor
1
Supplied accessory for the C200; optional accessory for the C200B.
Attaching the LCD Monitor
To attach the LCD monitor to the handle unit
1 Set the Q switch to OFF.
2 Rotate the LCD monitor mount 180° toward the LCD
attachment unit lock screw ( ) and attach the LCD
monitor ( ).
• Align the Í marks on the LCD monitor and LCD
monitor mount.
• Use the hex wrench
LCD monitor mount.
1
Supplied with the HDU-2.
• Based on your needs, you can mount the LCD monitor so that it faces toward or away from you.
1
(for 0.64 cm, 1/4" screws) and turn the lock
1
to secure the handle unit firmly.
1
to the LM-V1 LCD Monitor
1
or directly to the camera body itself. For details on adjusting the LCD monitor, refer to
Adjusting the LCD Screen or Viewfinder
(A 40) and
1
(for 0.64 cm, 1/4" screws) to secure it firmly with the LCD monitor fixation bolt on the
1
, you can attach the LCD monitor to
(A 41).