Table of Contents
Advertisement
Playing Back Clips
After you select a clip to play back from the index screen, you can control
the playback with the buttons on the camera (play/pause/stop only) or
with the joystick and onscreen joystick guide (A 135).
1 Move the orange selection frame to the clip you want to play
back.
Ò
2 Press the
button to start playback.
• The selected clip will be played back.
• Press the Ò button again or press the joystick to pause/resume
the playback.
• Press the Ñ button to stop the playback and return to the index
screen.
Custom picture settings of RAW clips during playback
RAW clips are played back with the following custom picture settings.
[Gamma]:
[Wide DR]
[Color Space]: [BT.709]
[Color Matrix]: [Neutral]
Other picture settings are the same as those when [Activate Other Settings] is set to [Off].
IMPORTANT
• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the card slot cover of the card being accessed and do not remove the card.
Onscreen Displays
1
2
3
4
5
6
7
14 15
16
8
9
10
11
12
13
17
18
Playback
133
Advertisement
Table of Contents
