Ordering Components; Ptp 250 Kits; Table 2-8 Ptp 250 Kit Part Numbers - Motorola PTP 250 User Manual

Ordering components

Ordering components
This section describes describes how to select components for a planned PTP 250 link (as
an alternative to PTP LINKPlanner). It specifies Motorola part numbers for PTP 250
components.

PTP 250 kits

The PTP 250 is supplied as a 'Link' or an 'End' kit. A 'Link' kit contains components for
both ends of a link (including two ODUs and two PoE power supply units). An 'End' kit
contains components for one end of a link (including one ODU and one PoE power supply).
The kits may contain either integrated ODUs (antennas included) or connectorized ODUs
(separate antennas must be purchased).
PTP 250 kits are supplied in two regional variants: one is for use in countries where FCC
or IC licensing restrictions apply (the USA and Canada), and the other is for use in ETSI
countries or the rest of the world (ETSI/RoW).
variants. Table 2-9

Table 2-8 PTP 250 kit part numbers

Frequency
variant
5.4 / 5.8 GHz
5.4 / 5.8 GHz
5.4 / 5.8 GHz
5.4 / 5.8 GHz
5.4 / 5.8 GHz
5.4 / 5.8 GHz
5.4 / 5.8 GHz
5.4 / 5.8 GHz
2-24
lists PTP 250 kit components.
Regional Integrated or
variant Connectorized
ETSI/RoW Integrated
ETSI/RoW Integrated
ETSI/RoW Connectorized
ETSI/RoW Connectorized
FCC/IC Integrated
FCC/IC Integrated
FCC/IC Connectorized
FCC/IC Connectorized
UNDER DEVELOPMENT
Chapter 2: Planning considerations
Table 2-8 contains part numbers for all kit
Link or
End Complete
Link Complete
End Complete
Link Complete
End Complete
Link Complete
End Complete
Link Complete
End Complete
phn-2182_003v004 (Oct 2011)
Part
number
WB3716
WB3717
WB3718
WB3719
WB3720
WB3721
WB3722
WB3723