Makita GA7911 Instruction Manual page 7

Switch action
To start the tool, simply pull the trigger.
Release the trigger to stop. For continuous
operation, pull the trigger and then push in
the lock button. To stop the tool from the
locked position, pull the trigger
fully,
then
release
it.
L-
Lock button
CAUTION
:
Before plugging in the tool, always check to
see
that the trigger switch actuates properly
and returns to the "OFF" position when rele
Operation
Hold the tool firmly. Turn the tool on and
then apply the abrasive disc to the work-
piece.
In general, keep
the
abrasive disc
a t
an
angle of about 15" to the workpiece sur-
face.
Apply slight pressure only. Excessive pres-
sure will result in poor performance and
premature wear to the abrasive disc.
!ased.
7