Pioneer SC-27 Service Manual page 72

1
[When the PC and AV amplifier are connected via a DHCP router]
A
Be sure to confirm and note the IP address.
How to Confirm the IP Address
(1) Set the remote control operation switch to SOURCE (SC-27 only).
(2) Press the HOME MEDIA GALLERY button to set the input function to Home Media Gallery.
(3) Select "Setup," using the
(4) Select "Information" then press ENTER. The version of the network firmware will be displayed.
(5) Change displays, using the
B
(6) To return to the Top menu screen, press the Return button twice.
3. The following steps are to be performed on the PC.
Open Internet Explorer on the PC.
When the AV amplifier is directly connected with the PC, enter "http:// 192. 168. 000. 002" in the address box then
press the Enter key.
When the AV amplifier is connected via a DHCP router, enter the IP address of the AV amplifier you noted in the
address box then press the Enter key.
(1) Enter "http:// ***. ***. ***. *** (IP address of the AV amplifier)."
C
D
The following screen will be displayed.
Click on "Firmware Update."
E
F
72
1
2
or key, then press ENTER.
or key, to check the "IP Address."
Click.
SC-27
2
3
(2) Click on the Update button or press the Enter key.
3
4
4