Pioneer SC-27 Service Manual page 70

1
[Preparations]
A
Set the static IP address of the PC.
*When Connection B (connection via a DHCP router) is performed in [Procedure 1], this setting is not required.
Open the Control Panel. --->
Open the Network Connections (double click).
B
C
Local Area Connection (right click) ---> Properties
D
E
F
70
1
2
SC-27
2
3
Local Area Connections Properties --->
Internet Protocol (TCP/IP) ---> Properties
Internet Protocol (TCP/IP) Properties
Set the following settings.
Use the following IP address:
IP address: 192.168.000.001
Subnet mask: 255.255.255.0
3
4
4