Pioneer SC-27 Service Manual page 17

5
6 / / / (TUNE/PRESET) /ENTER
Use the arrow buttons when setting up your surround
sound system and the Audio or Video options. Also
used to control DVD menus/options and for deck 1 of a
double cassette deck player. Use TUNE / to fi nd radio
frequencies and use PRESET /
7 Component/Receiver control buttons
The main buttons ( , , etc.) are used to control a
component after you have selected it using the input
function buttons.
The controls above these buttons can be accessed after
you have selected the corresponding input function
button (for example DVD, DVR or TV). These buttons also
function as described below.
Press TUNER fi rst to access:
MPX – Switches between stereo and mono reception
of FM broadcasts. If the signal is weak, then switching
to mono will improve the sound quality.
NOISE CUT MODE 1 or 2 can be selected when this
unit is receiving AM broadcasts.
Press RECEIVER fi rst to access:
AUTO/ALC/DIRECT – Switches between Auto
Surround, Auto level control, Optimum Surround mode
and Stream Direct mode.
STEREO – Switches between stereo playback and
Front Stage Surround Advance modes.
STANDARD – Press for Standard decoding and to
switch between the various
Neo:6 options.
ADV SURR – Use to switch between the various
surround modes.
THX – Press to select a Home THX listening mode.
PHASE CTRL – Press to switch on/off Phase Control
or Full Band Phase Control.
STATUS – Press to check selected receiver settings.
PQLS – Press to select PQLS setting.
8 AUDIO – Changes the audio or channel on DVD or BD
discs.
DISP – Switches between named station presets and
radio frequencies.
CH +/– – Use to select channels for DVD/DVR units.
9 REMOTE SETUP
Use to input the preset code when making remote
control settings and to set the remote control mode.
10 TV CTRL
Use this button to set preset code of your TV's
manufacturer when controlling TV.
11 MULTI-ZONE operation selector switch
Switch to perform operations in the main zone, ZONE 2
and ZONE 3.
12 Remote control LED
Lights when a command is sent from the remote control.
5
6
to fi nd preset stations.
Pro Logic IIx and
SC-27
6
7
13 SOURCE
Press to turn on/off other components connected to the
receiver.
14 MASTER VOLUME +/–
Use to set the listening volume.
15 MUTE
Mutes the sound or restores the sound if it has been
muted (adjusting the volume also restores the sound).
16 RECEIVER
Switches the remote to control the receiver (used to
select the white commands above the number buttons
(A.ATT, etc.)). Also use this button to set up surround
sound.
17
Press to turn on/off the illumination of some of the
buttons.
7
8
A
B
C
D
E
F
17
8