Sfp Leds - Cisco ASR-920-24SZ-IM Installation Manual

Chapter 1 Overview

SFP LEDs

Each SFP port has an LED indicator. The LED is configured such that the up arrow indicates the port on
the upside and the down arrow indicates the port on the downside.
Table 1-7
LED
Labeled same as the
SFP port number
SFP+ LEDs
Each SFP+ port has an LED indicator.
Table 1-8
LED
Labeled same as the
SFP port number
8 T1/E1 Interface Module LEDs
Table 1-9
Table 1-9
LED
Active
Port
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
SFP Port LED Indication
LED State
Green
Blinking Green
Yellow
Off
SFP+ Port LED Indication
LED State
Green
Blinking Green
Yellow
Off
summarizes the LEDs for the 8 x T1/E1 interface module.
8 x T1/E1 Interface Module LEDs
LED State
Green
Off
Green
Blinking green
Amber
Blinking amber
Off
Cisco ASR 920 Series Routers Features
Indication
Link up in 1000Base-X/100Base-FX
Activity in 1000 Base-X/100Base-FX
Fault/Error
Link down
Indication
Link up in 10G
Activity in 10G
Fault/Error
Link down
Indication
Active
Operationally down; card is disabled or
shut down
All ports up
All ports up and one or more ports in a
loopback state
One or more configured ports are down
One or more configured ports are down
and at least one configured port is in a
loopback state
All ports disabled or shut down
1-15