4.4 LOGGING INTO ENERVISTA 650 SETUP
CHAPTER 4: SECURITY
4.4 Logging into EnerVista 650 Setup
Users have to log on in order to use EnerVista 650 Setup program after Security Control has been enabled. After the start
up of EnerVista 650 Setup, a dialog prompts for user name and password.
Figure 4-3: Login user
The user name field displays the last log in user name as default, in this example, TestUser. For the first log in session of
any user name, the default password is "password". The user is prompt to change the password to something else after
the first successfully log in.
Log on can also be done by clicking Security from the toolbar and choose Login New User. The user is prompted with the
same log in dialog box for a different user name and password combination.
In case a user has forgotten their log in password, the Forgot Password function can be used to retrieve the password.
Figure 4-4: Forgot your password?
A question, which is pre-set by the user, is asked. The password is retrieved for entering the right answer.
4-4
F650 DIGITAL BAY CONTROLLER
GEK-113000-AF