Chapter 3 Installation; Connecting The Telephone Cords; Section 3 Connecting The Telephone Cords - NEC Dterm DTZ-8R-1 Owner's Manual

Installation
S 1 S
ECTION ELECTING A
Select a location for the D
The base unit of the D
a standard 120 Vac outlet and telephone line jack. The base unit can also be
mounted on a standard wall plate using the wall mount adapter. Keep the base unit
and handset away from sources of electrical noise (motors, fluorescent lighting,
computers, PC monitor). Refer to
for a complete discussion of safety precautions.
S 2 I
ECTION NSTALLATION
To ensure optimum performance follow these guidelines.



S 3 C
ECTION ONNECTING THE
When connecting the telephone cords, observe the following precautions.



Owner's Manual
L
OCATION
term
term
Cordless DECT can be placed on a desk or tabletop near
P
RECAUTIONS
Each base unit must be placed at least 20 feet (6m) apart.
Always place the base unit on top of a desk or on higher shelves. Avoid
locations surrounded by metal surfaces.
Place the base unit away from any electrical component such as a PC, monitor
and other telephone.
T
ELEPHONE
Never install telephone wiring during a lightning storm.
Never touch bare telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Cordless DECT to avoid excessive heat or humidity.
Chapter 1 Specifications and Safety Information
C
ORDS
Chapter 3
3-1