Sony DVS-9000 User Manual page 1215

Icon Title Message
Recovery System disk has been
Complete damaged, and then recovered.
Shutdown and restart the
system is recommended to exit
from recovery mode.
Rename Files currently used for
playback cannot be renamed.
Restore Restoring...
Data
Success!!
Recovery binary on the USB
storage device is not found.
Restore Failure.
Copying recovery data hasn't
Data
finished.
Set Time/ Error: Wrong Format.
Date
Warning No Switcher information
available.
Please confirm "Network
Configuration" on Page 7311.
Warning This operation will be
cancelled, because the register
is locked.
Please change the register
status to be unlocked first.
Description
Corruption has been detected in the flash
memory for starting the menu CPU, but this has
been recovered. Since the system is operating
in recovery mode, shut down and restart as
a)
soon as practicable.
2546: Frame Memory >File >Rename
In the above menu, an attempt was made to
execute [Rename], but a movie (clip) currently
being played back is included in the selected
files.
Appears while restoring recovery data using
a)
Menu 9999.
Appears when recovery data has been
successfully restored using Menu 9999.
Recovery data for restoring using Menu 9999
cannot be found on the memory card. Check
that the recovery data has been correctly
copied to the memory card, and restart the
a)
system to retry.
Restoring recovery data using Menu 9999
failed. Check that the recovery data has been
correctly copied to the memory card, and
restart the system to retry.
7317: Engineering Setup >System
>Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
When starting up the menu system, the
switcher is not present in the system
information. Check the Data LAN connections,
and in the 7311:Engineering Setup >System
>Network Config menu, retry [Auto Config].
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store
>Edit
6411.1: Shotbox >Register >Store>Edit
In the above menus, an attempt was made to
store in a locked register. Unlock the register
before carrying out the store.
a)
a)
1215
Error Messages