Print Reports - Brother HL-L8260CDN Online User's Manual

Level 2 Level 3
WLAN WLAN Status
MAC Address
Set to Default -
WLAN Enable
Wi-Fi Push Button
Direct
PIN Code
Manual
Group Owner
Device Info.
Status Info.
I/F Enable
IPsec -
Network -
Reset
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.

[Print Reports]

Level 2
Printer Settings
Network Config
Print File List
WLAN Report
(For wireless network models)
Level 4 Level 5
Channel -
Speed -
SSID -
Comm. Mode -
- -
-
- -
- -
- -
- -
- -
Device Name -
SSID -
IP Address
-
Status -
Signal -
Channel -
Speed -
- -
- -
- -
Description
Print the Printer Settings page.
Print the Network Configuration Report.
Print a list of data saved in the memory.
Print the wireless LAN connectivity diagnosis result.
Description
Display the channel in use when the wireless
network is active.
Display the connection speed when the wireless
network is active.
Display SSID.
Display the current Communication Mode.
Display the MAC address of the machine.
Restore wireless network settings of your
machine to the factory settings.
Turn the wireless interface on or off.
Configure your Wi-Fi Direct network settings
using the one-button push method quickly.
Configure your Wi-Fi Direct network settings
using WPS with a PIN code quickly.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
View your machine's device name.
Display the Group Owner's SSID.
Display your machine's IP Address.
Display the Wi-Fi Direct network status.
Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays Strong.
Display the channel in use when the Wi-Fi
Direct network is active.
Display the connection speed when the Wi-Fi
Direct network is active.
Enable or disable the Wi-Fi Direct connection.
IPsec is an optional security feature of the IP
protocol that provides authentication and
encryption services. We recommend contacting
your network administrator before changing this
setting.
Restore all network settings of your machine to
the factory settings.
365