General Setup - Brother HL-L8260CDN Online User's Manual

Home > Machine Settings
Tables > Settings Tables (HL-L8260CDN/HL-L8260CDW)
Settings Tables (HL-L8260CDN/HL-L8260CDW)
Related Models: HL-L8260CDN/HL-L8260CDW
Use these tables to understand the various menus and options that you will use to set your preferences on the
machine.

[General Setup]

Level 2 Level 3
Tray Setting Paper Type
Paper Size
Check Size
Tray Use
Priority
Ecology Toner Save
Sleep Time
Quiet Mode
Auto Power Off
Panel Control Button Repeat
Message Scroll
LCD Contrast
Auto Online
> Change Machine Settings from the Control Panel
Level 4
MP Tray Select the paper type that matches the paper in the MP tray.
Tray1
Tray2
1
Tray3
1
Tray4
1
MP Tray Select the size of paper you loaded in the MP tray.
Tray1
Tray2
1
Tray3
1
Tray4
1
-
-
-
-
-
-
-
-
-
-
-
Description
Select the paper type that matches the paper in the standard
paper tray.
Select the paper type that matches the paper in the Optional
Tray (Tray 2).
Select the paper type that matches the paper in the Optional
Tray (Tray 3).
Select the paper type that matches the paper in the Optional
Tray (Tray 4).
Select the size of paper you loaded in the standard paper
tray.
Select the size of paper you loaded in the Optional Tray (Tray
2).
Select the size of paper you loaded in the Optional Tray (Tray
3).
Select the size of paper you loaded in the Optional Tray (Tray
4).
Select whether to display a message telling you to check that
the size of the paper in the machine and the machine's Paper
Size setting match.
Select the tray that will be used.
When the Auto option is selected in the Tray Use menu,
select the order in which the machine uses paper trays that
contain paper of the same size.
Increase the page yield of the toner cartridge.
Set how much time will pass before the machine enters
Power Saving Mode.
Decrease printing noise.
Set the number of hours that the machine will remain in Deep
Sleep Mode before going into Power Off Mode.
Set the time for the LCD message to change when holding a
or b at intervals.
Set the time in seconds that an LCD message will scroll
across the LCD. From Level 1=0.2 sec to Level 10=2.0 sec.
Adjust the contrast of the LCD.
Set the machine to return to Ready Mode after it has been
idle for 30 seconds.
> Settings and Features
360