D-Link DCS-825L Quick Install Manual page 9

1. The Image is out of focus.
You can turn the white focus ring on the front of the camera to adjust the focus.
2. How do I change the accent rings?
Rotate the access ring counterclockwise, then lift it off. Put the new ring on and rotate
it clockwise until it clicks into place.
3. How do I select a different lullaby?
Use the mydlink Baby app to change the lullaby. Click on the music icon on the camera's
live view screen. Select a lullaby from the list or select to play all.
4. I started the mydlink Baby Camera Monitor app, but I can't find my camera.
• Make sure your camera is turned on and receiving power.
• If you are setting up a new camera, make sure your smartphone or tablet is connected
to the camera's Wi-Fi signal (not your wireless router).
• The Wi-Fi network name should be [myBabyCam-XXXX], where XXXX is a 4-digit code
(the last 4 digits of your camera's MAC address).
• The Wi-Fi network name and password is printed on a label on the bottom of your
camera and on the back of this install guide.
• If you still can't find your camera, reset your camera by pressing its reset button for
10 seconds (while it is powered on).
5. Why is there a white haze when viewing in night vision mode?
The night vision lights on the camera may be reflecting off a nearby surface. Try
repositioning and aiming the camera.
FAQs
9