Figure 1.17 Ethernet 1Gbit/S Interface (Installed In A Controller) - Fujitsu ETERNUS DX100 S4 Basic Operation Manual

Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
●
Ethernet 1Gbit/s
The ports on the host interface are used for connecting a controller to a server with a LAN cable. This port
uses an RJ-45 connector.

Figure 1.17 Ethernet 1Gbit/s Interface (Installed in a Controller)

2
1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface port (CA#0, Port#2)
5. Host interface port (CA#0, Port#3)
6. Host interface (CA#1)
7. Host interface port (CA#1, Port#0)
8. Host interface port (CA#1, Port#1)
9. Host interface port (CA#1, Port#2)
10. Host interface port (CA#1, Port#3)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
3 5
4
Copyright 2017 FUJITSU LIMITED
8 10
7 9
6
26
P3AM-7662-09ENZ0