Front Loading Assembly - Philips VR109/55 Service Manual

www.freeservicemanuals.info

Front Loading Assembly

Before following the procedures described below, be sure to remove Front Loading Assembly from the main
mechanism of the deck assembly. (See Fig. DM3.) When reassembling, follow the steps in reverse order.
STEP START-
/LOC. ING
No. No.
[1] [1] Guide Holder
[2] [1] Slider Gear
*[3] [2] Slider Shaft
[4] [4] Cassette Plate
[5] [4] Slider L
[6] [4] Slider R
[7] [6] Door Opener A
[8] [8] Lock Lever
[9] [3] Cassette Guide R
[10] [3] Cassette Guide L
[11] [11] Joint Holder A
[12] [11] Cassette Drive Sub Gear
[13] [11] Cassette Drive Gear
[14] [13] Cassette Drive Lever
[15] [14] Front Door Opener
↓ ↓
1 : Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as Identification (location) No. of parts in the figures.
2 : Indicates the part to start disassembling with in order to disassemble the part in column (1).
3 : Name of the part
4 : Location of the part: T=Top B=Bottom R=Right L=Left
5 : Figure Number
6 : Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
7 : Adjustment Information for Installation
(+): Refer to Deck Exploded Views for lubrication.
*[3]: They are divided into two steps because, before reassembling Slider Shaft, one Slider Gear must be preinstalled
at either end of Slider Shaft.
06/28/2012
PART
T
L, R
T
T
T
T
R
B
R
L
R
R
R
R
R
↓ ↓
2-4-8
REMOVAL
REMOVE/*UNHOOK/
Fig. No. UNLOCK/RELEASE/
UNPLUG/DESOLDER
DM17 2(S-1), *2(L-1)
DM16, DM17 *4(L-2)
DM16, DM17
DM17 2(S-2)
DM17
DM17 (S-3)
DM17
DM17 (S-4), *(P-1)
DM17
DM17
DM17 (S-5), *(P-2)
DM17, DM18
DM17, DM18
DM17 Cassette Drive Spring
DM17, DM18 *(L-3)
↓
World of Free Manuals
INSTALLATION
ADJUSTMENT
CONDITION
Eject Position
Eject Position
Eject Position
Eject Position
Eject Position
↓ ↓
MK9FL