Rear View - Philips VR109/55 Service Manual

www.freeservicemanuals.info
REAR VIEW
22
11. CH(annel) buttons–Press to select desired chan-
nels for viewing or recording at the VCR. If you have
a PHILIPS TV, press to scan up or down through
your PHILIPS TV channels.
Tracking function–Press to minimise video 'noise'
(lines or dots on screen) during playback. (only on
the VCR)
Press to stabilize the picture in the Still mode when
the picture begins to vibrate vertically.
12. MENU button–Press and hold for 3 seconds during
power off to display the RF OUT CH setting menu.
Press to change the background to solid blue or the
weak signal in the Manual Tuning mode or the
Channel Change mode.
Press to display menu on the TV screen.
13. STATUS/EXIT button–Press to display the counter
or the current channel number and current time on
the TV screen. Press to exit the on-screen menu.
14. REC button–Press to begin manual recording.
OTR button–Press to activate One Touch Record-
ing.
15. NUMBER buttons–Press to enter digits when set-
ting programme (for example: setting clock or timer
programme). Press to select desired channels for
viewing or recording. To select channel, see "How
to use number buttons".
16. MEMORY button–Press to set counter memory on
and off.
17. MUTE button–If you have a PHILIPS TV, press to
mute your PHILIPS TV's sound. Press it again to
resume the sound.
18. VOL(ume) buttons–If you have a PHILIPS TV,
press to increase or decrease your PHILIPS TV's
volume.
19. ALT.CH button–If you have a PHILIPS TV, press to
return to the previously viewed channel.
06/28/2012
20. CLEAR button–Press to reset counter to 0:00:00.
Press to cancel a setting of timer programme. Press
to correct digits when setting programme (for exam-
ple: setting clock or timer programme).
21. Mode Select buttons
VCR button–Press to operate the VCR.
TV button–If you have a PHILIPS TV, press to
operate your PHILIPS TV.
22. Power cord–
Connect to a standard AC outlet (110-240V,
50/60Hz) (VR109/55 only).
Connect to a standard AC outlet (240V, 50Hz)
(VR109/75 only).
23. AUDIO OUT jack–Connect to the audio input jack
of your audio equipment or another VCR.
24. AUDIO IN jack–Connect to the audio output jack of
your audio equipment or another VCR.
25. AERIAL terminal–Connect to a VHF/UHF aerial or
CATV.
26. VIDEO OUT jack–Connect to a video input jack of
your video camera or another VCR.
27. VIDEO IN jack–Connect to a video output jack of
your video camera or another VCR.
28. RF OUT terminal–Connect to an aerial terminal of
your TV.
1-6-2
World of Free Manuals
23 24 25
AUDIO
AERIAL
RF OUT
IN
OUT
VIDEO
26 27 28
H67T0IB