Authenticator Diagnostics - D-Link DXS-3326GSR Manual

Octets Tx The number of octets transmitted in user data frames on this port during the session.
Frames Rx The number of user data frames received on this port during the session.
Frames Tx The number of user data frames transmitted on this port during the session.
ID A unique identifier for the session, in the form of a printable ASCII string of at least three
characters.
Authentic Method The authentication method used to establish the session. Valid Authentic Methods include:
System.
Authenticator's System.
Time The duration of the session in seconds.
Terminate Cause The reason for the session termination. There are eight possible reasons for termination.
UserName The User-Name representing the identity of the Supplicant PAE.

Authenticator Diagnostics

This table contains the diagnostic information regarding the operation of the Authenticator associated with each port. An
entry appears in this table for each port that supports the Authenticator function. To view Authenticator Diagnostics, click
Monitoring > Port Access Control > Authenticator Diagnostics.
The user can specify a switch in a switch stack using that switch's Unit ID by using the pull down menu in the top left hand
corner. The user may also select the desired time interval to update the statistics, between 1s and 60s, where "s" stands for
seconds. The default value is one second.
DXS-3326GSR Gigabit Layer 3 Switch
(1) Remote Authentic Server - The Authentication Server is external to the Authenticator's
(2) Local Authentic Server - The Authentication Server is located within the
1) Supplicant Logoff
2) Port Failure
3) Supplicant Restart
4) Reauthentication Failure
5) AuthControlledPortControl set to ForceUnauthorized
6) Port re-initialization
7) Port Administratively Disabled
8) Not Terminated Yet
Figure 10- 2 . Authenticator Diagnostics window 6
227