The user may search the IGMP Snooping Group Table by VLAN Name by entering it in the top lefthand corner and
clicking Search.
The following field can be viewed:
Parameter
VLAN Name
Multicast Group
MAC Address
Reports
Port Member
IGMP Snooping Forward
This window will display the current IGMP snooping forwarding table entries currently configured on the Switch. To view
the following window, open the Monitoring folder and click the IGMP Snooping Forward link.
The user may search the IGMP Snooping Forwarding Table by VLAN Name using the top left hand corner Search.
DXS-3326GSR Gigabit Layer 3 Switch
Figure 10- 1 . IGMP Snooping Group Table window
9
Description
The VLAN Name of the multicast group.
The IP address of the multicast group.
The MAC address of the multicast group.
The total number of reports received for this group.
These are the ports where the IGMP packets were snooped are displayed.
NOTE: To configure IGMP snooping for the DXS-3326GSR, go to the
Configuration folder and select IGMP. Configuration and other
information concerning IGMP snooping may be found in Section 6 of this
manual under IGMP.
Figure 10- 2 . IGMP Snooping Forwarding Table
0
221