D-Link DXS-3326GSR Manual page 222

Figure 10- 8. Tx Packets Analysis window (table for Bytes and Packets)
The following fields may be set or viewed:
Parameter
Unit
Port
Clear
Time Interval
Record Number
Bytes
Packets
Unicast
Multicast
Broadcast
Show/Hide
DXS-3326GSR Gigabit Layer 3 Switch
Description
Select the unit to display statistics for.
Select the port to display statistics for.
Clicking this button clears all statistics counters on this window.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Counts the number of bytes successfully sent from the port.
Counts the number of packets successfully sent on the port.
Counts the total number of good packets that were transmitted by a unicast address.
Counts the total number of good packets that were transmitted by a multicast
address.
Counts the total number of good packets that were transmitted by a broadcast
address.
Check whether or not to display Bytes and Packets.
209