Honeywell Satellite XT Manual To Operations page 29

Maintenance - Section 4
Reset Device
Offers the possibility to perform a "warm start" of the
instrument.
Actuate the <set> key to select.
Are You Sure ?
This screen is to confirm that a software reset should
be performed. Actuate the <set> key to confirm or use
the <esc> key to exit.
<Sensor Warm-Up Condition>
A sensor warm-up is performed and this screen is
shown until the displayed value is zero, except for
Oxygen sensors.
The warm-up time depends on the type of sensor.
<Normal Monitoring Condition>
The instrument will automatically switch to the
Monitoring Mode when the sensor service procedure
is finished.
Service
This submenu is used exclusively by trained Service
Personnel.
The functions are password protected.
Satellite XT R Version 4-8