Service And Repair - RIDGID CountPlus Operator's Manual

5. Carefully realign the container with the top,
making sure the gasket is correctly aligned,
and re-seat the four screws. Tighten the
screws until each one is hand-tight. Be sure
you have not pinched any wires or the gasket
in installing the container.
6. Test the CountPlus by plugging the reel into
the camera control unit. When the camera
view appears it should have the date/time
and distance display overlaid on the camera
image.
Note: When the battery is removed, the time
setting will be lost. To reset the date and time see
"System Settings", on page 6.

Service and Repair

•
Diagnostic instrument service must be
performed only by qualified repair
personnel. Service or maintenance
performed by unqualified repair personnel
could result in injury.
•
Provide proper cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
•
Conduct a safety check. Upon completion
of any service or repair of this product, ask
the service technician to perform safety
checks to determine that the product is in
proper operating condition.
•
Damage to the product that requires
service. Refer servicing to qualified service
SeeSnake CountPlus Cable Counter
If you have any questions regarding the service or
repair of this machine, call or write to:
For the name and address of your nearest
Independent Authorized Service Center, contact the
Ridge
www.ridgid.com.
In any correspondence, please give all the
information shown on the nameplate of your
CountPlus, including model number and
serial number.
Ridge Tool Company
personnel under any of the following
conditions:
o If liquid has been spilled or objects have
fallen into product;
o If product does not operate normally by
following the operating instructions;
o If the product has been dropped or
damaged in any way;
o When the product exhibits a distinct
change in performance.
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail: TechServices@ridgid.com
www.ridgid.com
Tool Company at (800) 519-3456 or
13