Configuration of Netgear DGN1000 Wireless Router
Set Multiplexing Method as VC-BASED
o
Set VPI as 0
o
Set VCI as 38
o
Set DSL mode as Auto (multi-mode)
o
Once all settings are entered press the Apply button. The next stage in the setup is to
configure your wireless connection.
Select Wireless Settings from the left hand side,
•
Wireless settings (recommended set up)
Change the SSID from NETGEAR to something more recognisable
o
Set the Region to Europe
o
Set Channel to auto
o
Set Mode to up to 150mbps
o
To add security to your network select the option Mixed WPA-PSK + WPA2-PSK
o
Enter a password for your wireless connection in the network key box
o
(Please make a note of the network key as this will become your wireless
password)
T1-1/TK/049
Version 1
03/12/10