Panasonic KX-T30810 Installation Manual page 72

Electronic modular switching system easa-phone
Hide thumbs Also See for KX-T30810:
Table of Contents

Advertisement

To place a call
on exclusi ve hold:
PRESS
"HOLD"
Description
The intercom call on exclusive hold can not be
released by any extension other than the phone
which has placed the call on hold.
Operation
1 .
You are in conversation with an internal
party.
2 .
Press the HO LD button.
The indicator on the ICM button will flash
slowly.
The confi r mation tone of 2 beeps will be
heard.
3 .
Press the HOLD button, again.
The indicator will flash in groups of
4.
To retrieve, press ' t he ICM button.
The indicator on the ICM button will return
to a steady green.
PRESS
AGAIN
2 .
3-16
To retrieve
PRESS
" ICM"
Conditions
When a call is on hold for more than 30
e
minutes aft er a hold time reminder sounds, the
call will be terminated automatically.
A hold time reminder is sounded through the
built-in speaker of the extension.
Calls on hold will be recalled either after
e
1
30 seconds,
minute,
30 seconds or
minutes, once handset is
2
replaced (or the SF-PHONE button is
pressed) . If hold recall time set is set to
"DISABLE", will not be recalled . Refer to
"Hold Recall Time Set " on page 2-34.
The hold time reminder is activated, even if the
hold recall time set is programmed to "DIS­
ABLE".
When lifting the handset (o r be pressing the
SP -PHONE button) :
before recalling . . . the dial tone will be heard
with the call on hold.
You
phone number.
while recalling . . . the call on hold will be
released and entered into the
conversation mode.
An Intercom hold can be activated on one
extension only.
·
1
and
minute
may
dial
another

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents