Specifications - Makita AF505 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Dimensions (L X H X W)
Min. hose diameter
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear safety glasses.
･
Do not use on scaffoldings, ladders.
Noise
The typical A-weighted
according to EN792:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value determined according to
EN792:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Model
Air pressure
Nail Iength
Nail capacity
Net weight
noise level determined
) : 81 dB (A)
pA
) : 94 dB (A)
WA
2
) : 2.5 m/s or less
h
2
END106-3
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
ENG905-1
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Pneumatic Brad Nailer
Model No./ Type: AF505
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
ENG904-2
standards or standardised documents:
EN792
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
ENG901-1
000230
2
AF505
0.39 - 0.78 MPa (3.9 - 7.8 bar)
15 mm - 50 mm
100 pcs.
260 mm X 64 mm X 237 mm
6.5 mm
1.5 kg
Corporation as
23.3.2010
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
ENH003-14
the responsible