Dhcp Client Setting - NEC SL1100 Networking Manual

Issue 6.0
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-63 : DHCP Client Setting to enable or disable the SL1100 to
receive its IP Addressing information from a DHCP server.
Input Data
Item
No.
01
Feature Cross Reference

5 - 20
Item
DHCP Client Mode
Conditions
This feature can not be enabled if Program 10-13-01 (DHCP Server) is enabled.

None

10-63 : DHCP Client Setting

Input Data Default
0 = Disable
1 = Enable
Description
1
If you are using IP Phones/IP
trunks it is recommended to not
use the DHCP Client function, a
static IP address is preferred. If
you are going to still use DHCP,
the DHCP server should be set up
so that the same IP address is
always provided to the SL1100.
If this program is changed a
system reset is required.
Programming
NEC SL1100