1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Keep the Phillips #2 screwdriver ready.
Steps
1.
Align the tabs under the top cover with the slots on the top of the chassis.
2.
Slide the cover toward the front of the system until the screw holes on the cover align with the screw holes on the chassis.
3.
Tighten the screws to secure the cover onto the chassis.
Figure 97. Installing the system top cover
1.
system top cover
Next steps
1.
Install the system cover.
2.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
148
2.
screw (3)