Removing The Control Panel Assembly Cover - Dell PowerEdge T330 Owner's Manual

Related links
Preparing a system for conversion from tower mode to rack mode
Installing the optical drive or tape drive

Removing the control panel assembly cover

Removing the control panel assembly cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the control panel assembly.
Steps
1. Unhook the tab adjacent to the power button.
2. Unhook the tab on the bottom of the control panel assembly cover.
3. Pull the control panel assembly cover to detach it from the control panel.
Figure 84. Removing the control panel assembly cover for system with LCD panel
Next steps
1. Install the control panel assembly cover.
2. Follow the procedure listed in the After working inside your system section.
Related links
Removing the control panel assembly
Installing the control panel assembly cover
Preparing a system for conversion from tower mode to rack mode
132