Mitsubishi Electric Q26UD(E)HCPU User Manual page 642

Function
*2
Multiple CPU system
Installation of a PC CPU module into a multiple CPU system
*1
High speed interrupt
Index modification for module designation of dedicated
instruction ( Manuals of the intelligent function modules
that support the use of dedicated instructions)
Selection of refresh item for COM instruction (
Q/L Programming Manual (Common Instruction))
Online change (files) of SFC programs
File memory capacity change
CC-Link Remote network additional mode (
System Master/Local Module User's Manual)
Incomplete derivative PID operation function
Floating-point comparison instruction speedup
Read of the SFC active step comment (
Q/L/QnA Programming Manual (SFC))
Error detection in the redundant power supply system
Use of clock data of 1/1000 second
Storage of sampling trace files in standard RAM
Individual setting of refresh device on multiple CPU system
Execution status selection of the fall instruction during online
*1
change
CC-Link block data assurance per station (
System Master/Local Module User's Manual (Details))
Setting "8" for the number of modules in Network parameter for
CC-Link
(
CC-Link System Master/Local Module User's Manual
(Details))
CC-Link IE Controller Network (
Network Reference Manual)
ATA card ( Page 237, Section 9.2.1)
SRAM card (4M bytes) (
*1 For details, refer to the following.
Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program Fundamentals)
*2 For details, refer to the following.
QCPU User's Manual (Multiple CPU System)
*3 For details, refer to the following.
MELSEC-Q/L/QnA Programming Manual (PID Control Instructions)
640
MELSEC-
*1
*1
CC-Link
*3
MELSEC-
*1
*1
*1
CC-Link
CC-Link IE Controller
Page 237, Section 9.2.1)
Function
number (first
version
5 digits)
"02122" or later
*2
"03051" or later
"04012" or later
"04122" or later
"05032" or later
"07012" or later
B
"07032" or later
*2
"07092" or later
"08032" or later
"09012" or later
"16021" or later
Programming tool version
Serial
GX Works2
Version 1.15R
or later
Version 1.15R
or later
Version 1.15R
or later
Version 1.15R
or later
GX
Developer
Version 7 or
later
Version 7.10L or
later
Version 8 or
later
---
Version 8 or
later
Version 8.03D
or later
---
Version 8.23Z or
later
---
Version 8.23Z or
later
Version 8.27D
or later
Version 8.32J or
later
Version 8.45X
or later
---