Enabling/Disabling Auto Changeover; Reset Options - Honeywell Lyric T5 Wi-Fi User Manual

Enabling/disabling auto changeover

To enable auto changeover (when the thermostat
automatically chooses heating or cooling to
achieve your desired temperature), follow the
steps below.
Touch Menu on the thermostat home screen.
1
2 Touch the
CHANGEOVER, then touch Select.
3 Touch the
Touch Done and touch Back to return to the
thermostat home screen.
To turn Auto mode on, touch Mode on the
thermostat home screen until you see the word
Auto appear. You'll then see Auto Chg. On in the
upper-right corner, and the active mode (Heat
or Cool) will display under Mode. To set your
temperature preferences in Auto mode, see page
7.

Reset options

To clear your settings or device credentials or to reset thermostat to original factory
default setting, use one of the reset options below.
• Factory reset: Resets the thermostat back to original factory settings.
• Schedule reset: Resets your schedule back to the default Monday-Friday,
Saturday-Sunday schedule.
• HomeKit: Clears your Apple® HomeKit™ device credentials (provided HomeKit was
previously configured).
• Wi-Fi reset: Clears your Wi-Fi router credentials (provided a Wi-Fi router was
previously configured).
Selecting a reset option
Touch Menu on the thermostat home screen.
1
2 Touch the
RESET, then touch Select.
3 Touch the
option, then touch Select.
4 Touch Yes to complete the reset or No to
return to the reset sub-menu.
or arrows until you see
or arrows until you see AUTO.
or arrows until you see
or arrows to choose a reset
Back Select
Back Select
24
Back Select
Back Select
No Yes