Cisco DX650 Administration Manual page 147

Feature Description
Require Screen Lock Indicates whether screen lock is required on
the device. Options:
• User controlled.
• PIN - A numeric password that is at least
• Password - An alphanumeric password,
Maximum Screen Indicates maximum idle time in seconds before
Lock Timeout the device automatically locks the screen. After
the screen is locked, the user password is
required to unlock it
Lock Device Allows the administrator to lock the device to
prevent unauthorized user access.
Wipe Device Allows the administrator to erase the user data
and configuration on the device.
Kerberos Realm Authentication realm for web proxy Kerberos.
Load Server Indicates that the device will use an alternative
server to obtain firmware loads and upgrades,
rather than the defined TFTP server.
Peer Firmware Enables or disables Peer to Peer image
Sharing distribution in order to allow a single device
in a subnet to retrieve an image firmware file
and then distribute it to its peers.
Log Server Specifies an IP address and port of a remote
system to which log messages are sent.
Web Access Indicates whether the device will accept
connections from a web browser or other
HTTP client.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
four digits long.
consisting of at least four alphanumeric
characters, one of which must be a
non-numeric character, and one must be
a capital letter.
Configure Product-Specific Options
Default
PIN
For more information, see the
Screen Lock and Automatic Lock
Setup, on page 139.
Default: 600
Minimum: 15
Maximum: 1800
For more information, see the
Screen Lock and Automatic Lock
Setup, on page 139.
Disabled
Disabled
Maximum length: 256
Hostname or the IP address of local
server.
Maximum length: 256.
Enabled
IP address of remote system
Maximum length: 32.
Disabled
129