Specifications; Important Safety Instructions - Makita AT1150A Instruction Manual

ENGLISH
3-1. Depth adjusting plate
3-2. Hex wrench
6-1. Hook
6-2. Screw
7-1. Lock pin
7-2. Pusher
9-1. Pusher
10-1. Air fitting
10-2. Air socket
11-1. Trigger

SPECIFICATIONS

Applicable staples
Min. hose diameter
Dimensions (L x W x H)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: WHEN USING THIS TOOL, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF PERSONAL
INJURY, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
For personal safety and proper operation and
•
maintenance of the tool, read this instruction
manual before using the tool.
Always wear safety glasses to protect your eyes
•
from dust or staple injury.
WARNING:
It is an employer's responsibility to enforce the use
of safety eye protection equipment by the tool
operators and by other persons in the immediate
working area.
For Australia and New Zealand only
•
Always wear safety glasses and face shield to
protect your eyes from dust or staple injury. The
safety glasses and the face shield should conform
with the requirements of AS/NZS 1336.
WARNING:
It is an employer's responsibility to enforce the use
of safety eye protection equipment by the tool
operators and by other persons in the immediate
working area.
Explanation of general view
11-2. Contact element
11-3. Workpiece
12-1. Trigger
12-2. Contact element
12-3. Workpiece
13-1. Exhaust cover
14-1. Driver guide
14-2. Latch
15-1. Slotted bit screwdriver
15-2. Latch
Model
Air pressure
Staple capacity
Net weight
AT1150A
370 mm X 87 mm X 290 mm
2.3 kg
ENB103-1
Safety glasses
Face shield
000114
Wear hearing protection to protect your ears
•
against exhaust noise and head protection. Also
wear light but not loose clothing. Sleeves should
be buttoned or rolled up. No necktie should be
worn.
Rushing the job or forcing the tool is dangerous.
•
Handle the tool carefully. Do not operate when
under the influence of alcohol, drugs or the like.
General Tool Handling Guidelines:
•
(1)
(2)
(3)
(4)
(5)
4
15-3. Door
16-1. Door
17-1. Driver guide
17-2. Latch
22-1. Drain cock
23-1. Air filter
24-1. Oiler
24-2. Pneumatic oil
0.44 - 0.83 MPa (4.4 - 8.3 bar)
25 mm - 50 mm
140 pcs.
6.5 mm
370 mm X 76 mm X 260 mm
Always assume that the tool contains
fasteners.
Do not point the tool toward yourself or
anyone whether it contains fasteners or not.
Do not activate the tool unless the tool is
placed firmly against the workpiece.
Respect the tool as a working implement.
No horseplay.
AT2550A
2.3 kg