Outputting A Video Signal Input From Another Input Source During Reproducing A Multi-Channel Audio Signal - Yamaha RX-V665 Owner's Manual

Setting the option menu for each input source (OPTION menu)
■ Auto Preset
Input source: TUNER
Automatically detects radio stations in the FM frequency
band and registers them as preset stations (see page 29).
■ Clear Preset
Input source: TUNER
Clears the preset stations (see page 30).
■ Shuffle
Input source: iPod (DOCK)
Off*/Songs/Albums
Choices:
Changes the shuffle playback style (see page 32).
■ Repeat
Input source: iPod (DOCK)
Off*/One/All
Choices:
Changes the repeat playback style (see page 32).
■ Connect Disconnect
/
Input source: Bluetooth (DOCK)
Switches communication with a Bluetooth component on
and off (see page 33).
■ Pairing
Input source: Bluetooth (DOCK)
Performs pairing of this unit and a Bluetooth component
(see page 33).
■ Video Out
Input source: MULTI CH
AV1 to 6/V-AUX/Off*
Choices:
When the multi-channel input is selected, an input signal
input from another terminal is outputted to the video
monitor. See "Outputting a video signal input from
another input source during reproducing a multi-channel
audio signal" on this page.
36
En
Outputting a video signal input from
another input source during
reproducing a multi-channel audio
signal
When "MULTI" is selected as the input source, a video
signal input from another terminal can be output to the
video monitor. For example, even if an audio and video
component such as a DVD player that does not support a
multi-channel digital audio output, the video signal can be
output to the video monitor while reproducing a multi-
channel analog audio signal.
1
Press OINPUT l / h (or hMULTI) to
change the input source to "MULTI CH."
2
Press nOPTION on the remote control.
The OPTION menu appears.
3
Press oCursor k / n to display "Video," and
press oENTER.
Video;;;;;;AV1
4
Press oCursor l / h to select a video input
terminal from the following to input a video
signal that is output to the video monitor
during reproducing a multi-channel audio
signal.
– AV1-2 (COMPONENT VIDEO terminal)
– AV3-6 (COMPOSIT terminal)
– V-AUX (COMPOSIT terminal)
– Off (no video output)
5
To end the setting, press nOPTION.